Corroseal Water-Based Rust Converter Metal Primer

Description

Corroseal Water-Based Rust Converter Metal Primer
Garden Tools
Lawnmowers
Trailers
Wrought Iron Furniture & Railings
Decorative Screens
Pet Housing
Mailboxes
Fences
Automotive Restoration
Vehicle Frames
Recreational Equipment
Utility Trailers
Ramps
Floorboards
Quarter Panels
Bridges
Ships
Decks & Deck Railing
Boat Trailers
Ferries
Oar Locks
Shipping Containers
Storage & Fuel Tanks
Structural Steel
Manufacturing Equipment
Farm Equipment
Implements
Fencing & Gates
Pipes
STEP 1: Prepare the Surface
Follow these four easy steps and breathe new life into your work.
STEP 1: To start, remove large pieces of rust scale so Corroseal has a surface of fine rust to convert. This will avoid chipping later.
STEP 2: Clean the Surface
STEP 2: Scrub clean removing oil and dirt.
Start with a clean surface. Oil and dirt can make it difficult for Corroseal to adhere and react as needed, so cleaning first is crucial. Do not use an oil based cleaner for this step. We highly recommend Corroseal Cleaner for metal surface prep. Rinse thoroughly after cleaning. Then rinse again just to be sure.
STEP 3: Apply Corroseal
STEP 3: Using a brush, roller or spray, apply a thick coat of Corroseal. The thicker, the better. It will be white when first applied, then begin to turn black as it converts rust. Check in 15 minutes, if brown or gray spots peak through, apply another thick coat. A second coat is encouraged to get all rust covered with no seepage. Check again in 15 minutes and reapply as needed.
STEP 4: Paint & Enjoy
STEP 4: Once dry, it is primed and ready for paint. Painting will ensure extra protection from future rust. Enjoy!