-40%
26 rods (2 LBS) 1/8

26 rods (2 LBS) 1/8" x14" Vulcan 910-AH Tool Steel Electrodes

$ 52.79

Availability: 100 in stock
  • All returns accepted: Returns Accepted
  • Condition: New
  • MPN: VULCAN-910AH-18
  • Brand: Vulcan
  • Model: 910-AH
  • Return shipping will be paid by: Buyer
  • Country of Manufacture: United States
  • Item must be returned within: 30 Days
  • Restocking Fee: No
  • Refund will be given as: Money Back

    Description

    This listing is for 26 rods of 1/8" diameter, 14" length Vulcan Systems 910-AH Tool Steel electrodes.  Weight is approx 2 lbs.  What you see in the picture is what you get.  Below is the Manufacturer's Description:
    Vulcan 910-AH is an air harden tool steel electrode which produces a shock-resistant weld deposit that is dense, porous-free, and heat-treatable. Deposits take a high polish. When a cushioning layer is required, Vulcan 400-CG is recommended.
    Typical Applications:
    Die cast dies, cold shears, header dies, chisel, punch, and moil points for air hammer tools; blanking and bending dies, trimmer dies, forming dies, extrusion dies, coining dies, and sledge hammer faces.
    Procedure:
    Remove all cracks and heat checks by grinding or by some other suitable method. Clean area of all oxides and foreign matter. Use an anti-spatter paint on areas that are not to be welded. Preheat unit to a maximum of 600 degrees F if it is in the AISI “S” series tool steels. Be sure unit does not exceed 600 degrees during any phase of the welding process. On other base metals, pre-heat and post-heat accordingly. Deposit stringer beads. Peening is advisable. After welding, cool in still air to 150 degrees F. Temper at 600 degrees F at one hour per inch of thickness.
    Demonstration Video:
    Tool Steel Welding Demo - Vulcan 400-CG and 910-AH Electrodes - YouTube
    Video will open in a new window
    [isdntekvideo]